Siemens ARCADIS Varic Operator'S Manual Download Page 400

Page: 400 / 476

Operator Manual

of 24

SPR2-310.620.30.02.02

Configuration

Activating LUTs

(Look-up-Tables)

◆

In the left column (LUT pool) select the LUT that you want to activate.

◆

Click this button.
– The LUT is moved into the column of active LUTs and is thus available

using the respective keys.

Deactivating LUTs

◆

Select the LUT that you want to activate in the right column (LUT pool).

◆

Click this button.
– The LUT is moved to the LUT pool. Thus it is inactive.

Defining the LUT

default settings

The first LUT value in the Active list is set as default. Use the Default buttons to
define a different LUT value as default value.

◆

Select the value you want as default in the right column (active LUTs).

◆

Click this button.
– The default LUT value is displayed in bold on the list.

Saving parameters

◆

Click this button.
– Your changes are applied to the ARCADIS Varic system.
– The configuration dialog remains open for further entries.

◆

Configure further parameters on the corresponding tab card.

— or —

◆

Click this button.
– The dialog box closes.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 400 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: