manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 41 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 41

Safety

ARCADIS Varic
SPR2-310.620.30.02.02

23 

of 28

Equipment safety

0

Positioning the C-arm

0

In case of improper handling of the ARCADIS Varic, the mobility of the C-arm may 
lead to collisions of the image intensifier and the single tank with the patient and 
the patient table.

If the unit is positioned in an unfavorable way, there can also be a collision 
between the image intensifier/single-tank and the unit base. This can cause dam-
age to the respective components.

Brakes

Make sure the brakes are applied after adjusting the C-arm position.

Transport

When moving or transporting the C-arm system please take special care that the 
system parts do not collide with an obstacle. This could also result in accidental 
radiation release or an impairment of image quality under certain circumstances.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments