Siemens ARCADIS Varic Operator'S Manual Download Page 445

Page: 445 / 476

Maintenance

ARCADIS Varic
SPR2-310.620.30.02.02

of 16

Downloading an

update

◆

Click on

Download

at the lower right bottom of the window.

– The update is downloaded from the network.
– The

Progress

column shows the download status.

– A message window is shown when the process is successfully completed.

◆

Close the window with

Installing an update in

the system

The latest version of the virus protection files is now stored locally in your
ARCADIS Varic. You have to install them in the system to use them.

◆

Click

Install

in the left window area.

– The list of installable updates is shown.

◆

In the

Action

column of the corresponding update, click

Install

– The update is installed.
– A message window is shown when the process is successfully completed.

◆

Close the window with

◆

Close the

SoftwareDistribution

and

Service Software

windows with the

Close window

button.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 445 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: