manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 223 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 223

Image Processing

ARCADIS Varic
SPR2-310.620.30.02.02

21 

of 78

Scrolling page by page

0

A screen page can contain different numbers of segments depending on the lay-
out selected and it may contain only images of one series or images of more than 
one series depending on the display mode.

You can use the menu, keyboard, or scroll bar to page through the series of a 
study.

Scrolling with the

menu

◆

Select 

Scroll > Page Up

.

– You scroll forward by one page.

◆

Select 

Scroll > Page Down

.

– You scroll back by one page.

◆

Select 

Scroll > Last Page

.

– You jump to the last page of the current patient folder.

◆

Select 

Scroll > First Page

 to jump back to the first page of the current patient 

folder.
– You jump to the first page of the current patient folder.

The first image of the series is displayed in the top left segment of the image 
area.

Scrolling page by page

with the keyboard

◆

Press the 

Image up

 key.

– You scroll forward by one page.

◆

Press the 

Page Down

 key.

– You scroll backward by one page.

◆

Press the 

End

 key.

– The last screen page of the study is displayed.

◆

Press the 

Home

 key.

– You jump to the first page of the study.

The image area is filled with images. The first image of the series is displayed in 
the top left-hand corner of the image area.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments