manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 68 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 68

Operator Manual

22 

of 44

SPR2-310.620.30.02.02

System Description

Positioning an image for fluoroscopy

0

To have the image appear on the monitor in the desired orientation during fluo-
roscopy, you must rotate it.

Object display on the monitor depends upon the C-arm system position relative 
to the patient.

(1) right side of patient

(2) left side of patient
The rotation angle is displayed on the C-arm system (± 360°). The rotation angle 
is displayed absolute (proportional to the original position) as well as relative (pro-
portional to the previous image). 

◆

Press one of the keys.
– The image is rotated in the respective direction.

(2)

(1)

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments