manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 327 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 327

Documentation

ARCADIS Varic
SPR2-310.620.30.02.02

47 

of 98

Repeating jobs

Film jobs that have been exposed and are therefore completed can be repeated 
while they are still in the queue.

◆

Select the required film job that has already been exposed on film and has the 
"Printed" status.

◆

Click 

Repeat

.

– The job is assigned the "Queued" status and is copied to the end of the 

queue.

Deleting jobs

You can delete film jobs that are listed in a queue regardless of their status.

◆

Select one or more jobs.

— or —

◆

Click 

Select All

.

◆

Click 

Delete

.

– The selected jobs are deleted.

If you delete a job that is being exposed, the sheet that has been started will still 
be completed, but none of the following sheets will be exposed on film.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments