manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 465 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 465

Options

ARCADIS Varic
SPR2-310.620.30.02.02

13 

of 24

Sterile cover on the C-arm

0

To protect against contamination, the C-arm including the image intensifier and 
the X-ray tube assembly is completely covered with a two-part sterile cover. 
The cover is attached with sterile clamps.

C-arm completely covered

◆

Slip the cover over the image intensifier.

Caution

Insufficient attachment of the sterile cover.

The patient can be injured if the cover falls down!

◆

When attaching the sterile cover with the clamps, make sure the cover is 
fastened properly.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments