manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 242 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 242

Operator Manual

40 

of 78

SPR2-310.620.30.02.02

Image Processing

Zooming with the

mouse

The left mouse key is used to select or deselect images and objects. However, 
you can also switch over the function of the left mouse button to perform zoom-
ing and panning.

◆

Select 

Image > Zoom/Pan

.

Or

◆

Click the 

Zoom/Pan

 button on the 

Image

 subtask card.

◆

Now position the mouse pointer in the outer area of an image. 
– The cursor changes shape.

◆

Drag the mouse cursor up with the left mouse button pressed.
– The image is enlarged.

Or

◆

Drag the mouse cursor down with the left mouse button pressed.
– The image is reduced.
– As soon as you release the mouse button, the new zoom factor is applied 

to all the selected images or the selected scope of action.

When zooming, make sure you do not accidentally click on a graphic element. 
Otherwise, you would pan the graphic element and not the content of the image.

◆

Deselect 

Image > Zoom/Pan

 again.

— or —

◆

Click the relevant button again.
– The left mouse button is available for selecting images again.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments