Siemens ARCADIS Varic Operator'S Manual Download Page 185

Page: 185 / 476

Examination

ARCADIS Varic
SPR2-310.620.30.02.02

of 52

Native images from the database

Native images from previous examinations acquired in

Subtraction

mode (op-

tion) or

Roadmap

mode (option) are stored in the local database or in your archive

together with the subtraction images. Both image types can be displayed simul-
taneously on both monitors.

Loading and

displaying images

◆

Load the images of the requested patient into the

Viewing

task card by using

the

Patient Browser

◆

Select

Sub > Sub/Native Display

in the main menu of the

Viewing

task card.

— or —

◆

Click this button in the

Sub

subtask card.

– In the

Viewing

task card the subtraction images are displayed on the left

monitor.

– In the

Native

task card the corresponding native images are displayed on

the right monitor.

Closing the patient

After finishing your evaluation of patient images, close the folder of this patient.
Now you can load images of the next patient.

◆

Select

Patient > Close Patient

in the main menu of the

Viewing

task card.

– The images in the

Viewing

and

Native

task cards are unloaded. Both task

cards are empty now.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 185 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: