Siemens ARCADIS Varic Operator'S Manual Download Page 182

Page: 182 / 476

Operator Manual

of 52

SPR2-310.620.30.02.02

Examination

Using the References task card

Besides transferring images, you can select other important functions of the

References

task card from the C-arm system.

Scrolling

◆

Scrolling to the next reference image.

◆

Scrolling to the previous reference image.

Changing the

image display

◆

Toggling between single frame and multiple frame display.

◆

Selection of LUT steps on monitor B.

Print

◆

Printout of one or several reference image(s) on the local printer.
– If single frame display is selected, the image displayed on the right monitor

is printed.

– If multiple frame display is selected, the images selected on the reference

monitor are printed individually.

Printing does not take place immediately. Images are first transferred to the

Filming

task card and can be printed out later (provided that

Auto Expose

deactivated).
(

→

Register 7: Documentation, Page 19)

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 182 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: