manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 473 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 473

Options

ARCADIS Varic
SPR2-310.620.30.02.02

21 

of 24

Exposure grid

An exposure grid measuring the same as the cassette format can be inserted into 
the cassette holder with the cassette.

The exposure grid is delivered with the cassette holder.

◆

Always insert the exposure grid up to the end stop in the cassette holder. 

Attaching the cassette holder

0

3

1

2

Caution

Springs or pins not correctly attached.

Risk of injury if cassette holder becomes loose!

◆

Make sure the springs and pins (3) are securely locked in place.

◆

Ensure that both centering pins sit in the recesses.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments