Siemens ARCADIS Varic Operator'S Manual Download Page 230

Page: 230 / 476

Operator Manual

of 78

SPR2-310.620.30.02.02

Image Processing

Selecting a complete

series explicitly

◆

First select an image of the required series explicitly by clicking on it holding
the

Ctrl

key down or place the input focus on the image by clicking on it.

◆

Call up

Edit > Select Series

in the main menu.

– The whole series is now selected explicitly.

Selecting more than

one series explicitly

◆

Hold the

Ctrl

key down and click on individual images of the required series.

◆

Call up

Edit > Select Series

in the main menu.

– Several series are selected completely.

Deselecting images

If the explicit selection of images does not contain the set of images you require,
you can deselect individual images or all images.

◆

Place the input focus on an unselected segment manually with the mouse by
clicking on it.

◆

Call up

Edit > Deselect All

in the main menu.

– All selected images are deselected again.

After that, the standard input focus is set automatically, i.e. the top left segment
is active.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 230 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: