Siemens ARCADIS Varic Operator'S Manual Download Page 196

Page: 196 / 476

Operator Manual

of 52

SPR2-310.620.30.02.02

Examination

Configuration

The generation, printing and exporting of reports is configured in the

Structured

Reporting

dialog. Depending on the type of report (LithoReport or Radiation

Summary Report), you have different configuration possibilities.

Calling up the configuration window

You can call up the configuration window from the

syngo Configuration Panel

◆

Select

Options > Configuration

from the main menu.

◆

Double-click the

Structured Reporting

button.

– The

Structured Reporting

dialog is displayed.

Configuring the

LithoReport

To configure a LithoReport, you perform settings on the following cards:

❏

Parameter sets

: Here you define the contents of different selection lists.

❏

Stone locations

: Here you define the position indications for nephroliths

(gallstones etc.).

❏

Options

: Here you perform the presettings for LithoReport printing.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 196 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: