Siemens ARCADIS Varic Operator'S Manual Download Page 153

Page: 153 / 476

ARCADIS Varic
SPR2-310.620.30.02.02

of 52

Examination

Safety information relating to the
examination procedure

Before examination

Orientation aid for

image orientation

Integrated I.I. laser

aimer

Depending on the configuration of your ARCADIS Varic, you can use the integrat-
ed I.I. laser aimer for positioning the C-arm.

Single-tank laser

targeting device

Depending on the configuration of your ARCADIS Varic, you can use the integrat-
ed single-tank laser targeting device for positioning the C-arm.

Examination settings

Before starting surgery, please make sure that all the set parameters as well as
examination settings in all operation modes are correct.

Warning

Incorrect image position displayed on the monitor.

Surgical intervention in the wrong position!

◆

Use lead letters as orientation aids during the exposure.

Warning

Laser radiation

Risk of eye injury!

◆

Do not view the beam using optical instruments (laser class 1M).

Warning

Laser radiation

Risk of eye injury!

◆

Do not look directly into the laser beam (Class 2 laser).

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 153 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: