Siemens ARCADIS Varic, Operator'S Manual, Page: 263 / 476

Image Processing
ARCADIS Varic
SPR2-310.620.30.02.02
61
of 78
Saving, transferring, documenting, closing
images
0
After image processing, when all the images have been displayed in an optimum
way and have been evaluated, you can save and archive these images or transfer
them to the Filming task card for further evaluation and documentation.
After that, you can close the images of this patient and make space in the
Viewing task card for the images of the next patient.
Please note the following when transferring edited images:
Images that were zoomed in or out, shifted or rotated in the viewer may be
exported or transferred with reduced pixel matrix. Always include the original
image in the transfer. We strongly recommend that you include original images
in your diagnostic considerations, which should not be based solely on edited or
modified images.
Save images
0
Once you have finished processing and evaluating the images, save your results.
You can save your images in one of two ways:
❏
You can save the processed images in a new series.
❏
You can add the images to an existing series.
It is impossible for radiation to be released when images are being saved; this
applies particularly to large numbers of images. Wait until the save process is
finished, or save the images after all exposures have been made.
Note that the newly saved data may not immediately be shown in the Patient
Browser . The display should first be updated manually, in particular after com-
prehensive storage processes (select View > Refresh in the Patient Browser ).