Siemens ARCADIS Varic Operator'S Manual Download Page 347

Page: 347 / 476

Documentation

ARCADIS Varic
SPR2-310.620.30.02.02

of 98

Archiving in the network (option)

If your system is connected to a central archive, use this to archive your patient
and examination data (only with DICOM option).

The following information is of relevance for archive nodes:

❏

Destination

Name of the archive.

❏

Compression

Method by which data are compressed.

❏

Quality factor

Quality factor with which the data are compressed.

◆

Select the data that you want to archive.

◆

Call up

Transfer > Archive To...

– The dialog box

Archive To

is displayed. The available archive nodes and

drives are displayed.

◆

Select the required archive from the list.

◆

Click on

Archive

to transfer the data to the selected archive.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 347 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: