Siemens ARCADIS Varic Operator'S Manual Download Page 87

Page: 87 / 476

System Description

ARCADIS Varic
SPR2-310.620.30.02.02

of 44

Monitor trolley transport position

Prior to transport, the rolled-up power cable and the connection cable for the
C-arm system should be placed on the grips of the monitor trolley.

Depositing the

connection cable

◆

Place the rolled-up cables on the grips of the monitor trolley.

Park position of optional monitors

(1) Height-adjustable monitors

(2) Toggle switch for height-adjustment of the monitors

The height of the monitors can be adjusted with the black toggle switch.

◆

Press the arrow symbol for

Down

on the toggle switch.

– The monitors automatically move downwards.

(1)

(2)

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 87 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: