Siemens ARCADIS Varic Operator'S Manual Download Page 256

Page: 256 / 476

Operator Manual

of 78

SPR2-310.620.30.02.02

Image Processing

You can transfer images in the current shutter setting to the

Filming

task card

for printing (menu

Patient > Copy to Film Sheet

). If the image contains addition-

al graphic elements, they may not be hidden (menu

View > Hide Graphics

Otherwise, the shutter cannot be transferred to the film sheet, and printing is
impossible.

Removing the shutter

◆

Click on the border of the shutter.
– The shutter is selected.

◆

Press the

Del

key on your keyboard.

– The image is displayed in its original size again.

Images of a scene always have the same shutter. If they are moved or resized,
that change is applied to all images.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 256 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: