Siemens ARCADIS Varic Operator'S Manual Download Page 359

Page: 359 / 476

Documentation

ARCADIS Varic
SPR2-310.620.30.02.02

of 98

Selecting files

◆

Select the required drive and directory from the

Path

selection list.

– Select drive F:\ to select an inserted USB stick.

— or —

◆

If necessary, navigate through the directory tree by double-clicking on a folder
and using the "higher-level folder" button.

All directories starting with the configured root directory are accessible.

◆

Enter a file name.

You can specify several files at once using the wildcard "*".

◆

Select the file(s) in question from the directory.

You can select several files at once with the left mouse button using

Shift

and

Ctrl

◆

Confirm with

◆

Double-click the relevant file.
– The selected image files are imported into your local database.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 359 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: