Siemens ARCADIS Varic Operator'S Manual Download Page 468

Page: 468 / 476

Operator Manual

of 24

SPR2-310.620.30.02.02

Options

(1) Clamp

◆

Let the C-arm cover overlap the image intensifier cover and secure the C-arm
cover with a clamp.

◆

Tie down the cover of the X-ray tube.

The C-arm is now covered completely.

Clamps to keep covers in place

The clamps keep the sterilizable C-arm cover in place

and can also be sterilized.

Please make sure that the clamps are properly fastened. Otherwise there is a
danger of injury.

(1)

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 468 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: