Siemens ARCADIS Varic Operator'S Manual Download Page 192

Page: 192 / 476

Operator Manual

of 52

SPR2-310.620.30.02.02

Examination

Entering treatment

data

On the

Therapy

card, you enter data in preparation for treatment.

◆

Click the

Therapy

card into the foreground.

– The shockwave data of the treatment are entered automatically.

◆

Enter the missing data in the active fields.

◆

Click

Apply

Adding summary data

The

Summary

card already contains the permanent examination data (in particu-

lar relating to radiation). Here you can enter additional information on the exami-
nation and treatment.

◆

Click the

Summary

card into the foreground.

– The patient data are automatically transferred from the registration.

◆

Enter the missing data in the active fields.

◆

Click

Apply

Entering follow-up

data

On the

Follow up

card, you enter the measures to be taken following the exami-

nation and treatment.

◆

Click the

Follow up

card into the foreground.

◆

Enter the missing data in the active fields.

◆

Click

Apply

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 192 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: