manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 365 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 365

Documentation

ARCADIS Varic
SPR2-310.620.30.02.02

85 

of 98

Restarting jobs

If you have stopped jobs or if errors occurred in jobs, you can start them again 
from the beginning. You can also repeat a job that has already been completed.

◆

Select one or more jobs with "Stopping", "Stopped", "Failed" or "Completed" 
status.

◆

Click 

Restart

.

– The jobs are restarted, their status is now "Active" or "Queued".

Deleting jobs

You can delete jobs that are listed in the job status windows, provided they do 
not have the status "Receiving", "Recording" or "Spooling".

◆

Select one or more jobs.

◆

Click 

Delete

.

– These jobs will no longer be executed and they will be removed from the 

job list.

For technical reasons, large jobs will remain in the job list for a while with 
"Deleting" status even after they have been deleted. Do not restart or continue 
such a job.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments