Siemens ARCADIS Varic, Operator'S Manual, Page: 179 / 476

Examination
ARCADIS Varic
SPR2-310.620.30.02.02
29
of 52
Displaying reference images
0
Besides the live images on the left monitor, selected images, e.g. images that
you may need for comparisons, can be displayed on the right monitor in the
References task card.
If images from previous examinations of a patient are required, these must be
loaded prior to the new examination.
During the examination, you can define suitable live images as references and
manually transfer them to the
References task card. Depending on the configu-
ration settings, individual images and scenes can also be loaded automatically.
As long as you do not perform an examination, you work directly at the monitor
trolley in the
Viewing
and
References
task cards. During an examination you can
use the control panel of the C-arm system to control the individual functions of
the
References task card.
Operation at the monitor trolley
0
You can load images of completed examinations from the Patient Browser into
the Viewing task card, and then into the References task card.
Images from the hospital network (e.g. archive) can also be loaded as reference
images using the
Viewing task card. Thus you have the possibility of displaying
images from other modalities (e.g. MR, CT etc.) on the References task card.
Notes
0
Since permanent network functionality cannot always be guaranteed, reference
images should be loaded from the network archive before starting an examina-
tion.
Once a patient has been registered for an examination, only images of the regis-
tered patient can be transferred to the
References task card.