manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 64 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 64

Operator Manual

18 

of 44

SPR2-310.620.30.02.02

System Description

Preparing exposure

0

Protection against contamination and the penetration of fluids

0

If a significant amount of fluid is expected during an examination, there is a risk 
of fluids penetrating into the system. It is recommend to cover the relevant areas 
appropriately.

The C-arm can be covered completely or partially with a sterile disposable sheet 
to protect it against contamination (

→

Register 11: Options, Page 13).

Positioning the C-arm

0

◆

Align the ARCADIS Varic.

◆

Release the brakes and set the C-arm to the required position.
(

→

Page 13)

Warning

As long as the brakes are not locked after movement, the C-arm system moves 
freely.

Risk of injury to the patient and personnel!

◆

Engage the brake.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments