Siemens ARCADIS Varic Operator'S Manual Download Page 402

Page: 402 / 476

Operator Manual

of 24

SPR2-310.620.30.02.02

Configuration

Activating edge

enhancement values

◆

Select the value that you want to activate in the left column (edge enhance-
ment pool).

◆

Click this button.
– The edge enhancement value is moved into the column of active values

and is thus available via the respective key.

Deactivating edge

enhancement values

◆

Select the value that you want to activate in the right column (active edge en-
hancement value).

◆

Click this button.
– The edge enhancement value is moved to the edge enhancement pool.

Thus it is inactive.

Saving parameters

◆

Click this button.
– Your changes are applied to the ARCADIS Varic system.
– The dialog box closes.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 402 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: