manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 320 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 320

Operator Manual

40 

of 98

SPR2-310.620.30.02.02

Documentation

Setting the original

image

◆

Click the 

Original Image

 button.

Or

◆

Select the 

Original Image

 option in the 

Film Properties

 dialog box.

– The images are displayed in the segment in their original size (max. 1% tol-

erance), the dimensions on the screen and on the printout are the original 
ones.

If it is not possible to display images in the 

Original Image 

aspect ratio (1:1 

scale), a message is displayed and the 

Fit to segment

 option is selected instead.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments