manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 86 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 86

Operator Manual

40 

of 44

SPR2-310.620.30.02.02

System Description

Driving the unit

(1) Foot brake locked (pedal tilted)

(2) Foot brake released (pedal horizontal)

◆

Release the foot brake.

(1) Steering lever shown in the position for forward travel

(2) The steering lever can be locked into position for transverse travel to the right 

or left

◆

Lift the steering lever and turn it in the desired direction.

The steering lever can be locked into three different positions. One is for move-
ment straight ahead, the others for transverse travel to the right or left.

◆

Move the C-arm system by hand.
– If the steering lever is in a transverse position, the C-arm system moves 

parallel to the lever position.

When transporting the C-arm system make sure there are no obstructions on the 
floor.

(1)

(2)

STOP

(1)

STOP

(2)

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments