manualshive.com logo in svg

Sharp MX-C311, Operation Manual, Page: 95 / 849

Share
Download
Sharp MX-C311 Operation Manual Download Page 95

12

INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER

3

Printers connected to the 
network are detected. 
Select the machine and 
click the [Next] button.

4

A confirmation window appears. Check the contents and then click 
the [Next] button.

• Machine connection method: LPR Direct Print (Auto Search)

• Set as default printer:Yes (excluding the PC-Fax driver)

• Printer driver name: Cannot be changed

• Display fonts: Installed

If you selected [Custom installation], select [LPR Direct Print (Auto Search)] and 
click the [Next] button.
If you selected other than [LPR Direct Print (Auto Search)], see the following 
pages:

• LPR Direct Print (Specify Address): page 15 

• IPP: page 19   •Shared printer: page 30

• Connected to this computer: page 22

• If the machine is not found, make sure that the machine is powered on and 

that the machine is connected to the network, and then click the [Re-search] 
button.

• You can also click the [Specify condition] button and search for the machine 

by entering the machine's name (host name) or IP address.

☞

Checking the IP address of the machine (page 7)

!mxc381_us_ins.book  12 ページ  ２００８年８月１９日　火曜日　午前１０時４２分

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments