manualshive.com logo in svg

Sharp MX-C311, Operation Manual, Page: 90 / 849

Share
Download
Sharp MX-C311 Operation Manual Download Page 90

7

CONNECTING THE MACHINE

CONNECTING TO A NETWORK

To connect the machine to a network, connect the LAN cable to the machine's 
network connector. Use a shielded LAN cable.

After connecting the machine to a network, be sure to configure the IP address 
and other network settings before installing the software. (The factory default 
setting for the IP address is to receive the IP address automatically when the 
machine is used in a DHCP environment.)
Network settings can be configured using "Network Settings" in the system 
settings (administrator) on the machine. 

X

Checking the IP address of the machine

You can check the IP address of the machine by printing out the "All Custom Setting List" 
in the system settings. Follow these steps to print out the "All Custom Setting List".
Press the [SYSTEM SETTINGS] key, touch the [List Print (User)] key, and then 
touch the [Print] key of "All Custom Setting List".

CONNECTING THE MACHINE WITH A USB 
CABLE (Windows)

The machine can be connected to a computer using a USB cable if the 
computer is a Windows computer. (The USB interface on the machine cannot 
be used in a Macintosh environment.)
The machine and computer should be connected while the printer driver is 
being installed. If a USB cable is connected before the printer driver is installed, 
the printer driver will not be installed correctly. For the procedure for connecting 
a USB cable, see "WHEN THE MACHINE WILL BE CONNECTED WITH A 
USB CABLE" (page 22).

• If the machine is used in a DHCP environment, the IP address of the machine may 

change. If this happens, printing will not be possible. This problem can be avoided by 
using a WINS server or by assigning a permanent IP address to the machine.

• This manual explains how to set up the software in a Windows network 

environment and in a Macintosh network environment.

!mxc381_us_ins.book  7 ページ  ２００８年８月１９日　火曜日　午前１０時４２分

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments