Home
/
Sharp
/
MX-C311
/
Operation Manual

Sharp MX-C311, Operation Manual, Page: 765 / 849

Share

Page: 765 / 849

Sharp MX-C311 Operation Manual Download Page 765

7-64

SYSTEM SETTINGS

Copy Function Settings

The following settings are related to copying. Touch the [Copy Function Settings] key to configure the settings.
Default settings selected with these settings apply to all functions of the machine (not just the copy function).

Initial Status Settings

The copier settings are reset when the [POWER] key (

) is turned on, when the [CLEAR ALL] key (

) is pressed, or

when the auto clear interval has elapsed. These settings are used to change the default settings for copy mode.
The following settings can be changed:

Item

Description

Color Mode

Configure default color mode settings.

Paper Tray

Specify the paper tray that is selected by default.

Exposure Type

Configure exposure mode settings.

Copy Ratio

Specify the copy ratio that is selected by default.

2-Sided Copy

Configure the 2-sided mode settings that are selected by default.
If this setting is used to change the default setting for the duplex function to other than "1-Side to 1-Side"
and the duplex function or automatic document feeder fails or is disabled, the setting will revert to
"1-Side to 1-Side".

Output

Set the print output method that is selected by default.

Return to the
Defaults

This returns all items to the factory default settings.

«
...
763
764
765
766
767
...
»

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments