manualshive.com logo in svg

Sharp MX-C311, Operation Manual, Page: 325 / 849

Share
Download
Sharp MX-C311 Operation Manual Download Page 325

2-89

COPIER

Contents

ADJUSTING THE BRIGHTNESS OF A COPY (Brightness)

The brightness of color images can be adjusted.

1

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.
After placing the original, specify the original size.

☞

ORIGINAL SIZES

 (page 2-29)

2

Select the special modes.

(1) Touch the [Special Modes] key.

(2) Touch the [Color Adjustments] key.

(3) Touch the [Brightness] key.

☞

[Color Adjustments] KEY

 (page 2-82)

3

Adjust the brightness.

(1) Adjust the brightness.

Touch the [+] key to make the image brighter, or the [-] 
key to make the image darker.

(2) Touch the [OK] key.

You will return to the special modes screen. Touch the 
[OK] key to return to the base screen of copy mode.

4

Press the [COLOR START] key.

Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you 
have selected sort mode, change originals and press the [COLOR START] key. Repeat until all pages have been scanned 
and then touch the [Read-End] key.

To cancel scanning and copying...

Press the [STOP] key (

).

To cancel a brightness setting...

Touch the [Cancel] key in the screen of step 3.

Darker

Original

Brighter

OK

OK

Cancel

Color Adjustments

Brightness

0

-2

2

(1)

(2)

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments