manualshive.com logo in svg

Sharp MX-C311, Operation Manual, Page: 320 / 849

Share
Download
Sharp MX-C311 Operation Manual Download Page 320

2-84

COPIER

Contents

ADJUSTING THE SHARPNESS OF AN IMAGE (Sharpness)

This is used to sharpen an image or make it softer.

1

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.
After placing the original, specify the original size.

☞

ORIGINAL SIZES

 (page 2-29)

2

Select the special modes.

(1) Touch the [Special Modes] key.

(2) Touch the [Color Adjustments] key.

(3) Touch the [Sharpness] key.

☞

[Color Adjustments] KEY

 (page 2-82)

3

Adjust the image.

(1) Touch the [Soft] key or the [Sharp] key.

(2) Touch the [OK] key.

You will return to the special modes screen. Touch the 
[OK] key to return to the base screen of copy mode.

4

Press the [COLOR START] key.

Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you 
have selected sort mode, change originals and press the [COLOR START] key. Repeat until all pages have been scanned 
and then touch the [Read-End] key.

To cancel scanning and copying...

Press the [STOP] key (

).

The sharpness setting is also applied when black & white copies are made.

To cancel the sharpness setting...

Touch the [Cancel] key in the screen of step 3.

Soft

Sharp

OK

OK

Cancel

Color Adjustments

Sharpness

Sharp

Soft

(1)

(2)

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments