manualshive.com logo in svg

Sharp MX-C311, Operation Manual, Page: 619 / 849

Share
Download
Sharp MX-C311 Operation Manual Download Page 619

5-81

SCANNER/INTERNET FAX

Contents

WHITENING FAINT COLORS IN THE IMAGE
(Suppress Background)

This feature is used to suppress light background areas.

• This function cannot be used in Internet fax mode.

• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.

1

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.
When the original is a different size than the size setting, set the original size.

☞

SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE

 (page 5-51)

2

Specify the destination.

☞

ENTERING DESTINATIONS

 (page 5-17)

When scanning to USB memory, there is no need to specify the destination. Go to step 3.

3

Select the special modes.

(1) Touch the tab of the mode that you wish to use.

(2) Touch the [Special Modes] key.

(3) Touch the [Suppress Background] key.

Read the message that appears and then touch the [OK] key.

☞

SPECIAL MODES

 (page 5-65)

The lightness level at which 
suppression takes place 
can be adjusted.

Level [+]

Level [-]

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments