Sharp MX-C311, Operation Manual, Page: 253 / 849

2-17
COPIER
Contents
Using the [Binding Change] key
6
Check the paper to be used and the
color mode.
Make sure that the desired paper (tray) and color mode are
selected.
• To change the paper (tray), touch the [Paper Select] key.
☞
PAPER TRAYS (page 2-9)
• To change the color mode, touch the [Color Mode] key.
☞
COLOR COPY MODES (page 2-21)
For some original size settings, the same size of paper as the original may not be automatically selected. In this case,
manually change the paper size.
7
Set the number of copies (number of
sets) with the numeric keys.
• Up to 999 copies (sets) can be set.
• If you are only making a single copy, the copy can be made with the copy number display showing "0".
If an incorrect number of copies is set...
Press the [CLEAR] key ( ) and then enter the correct number.
8
Press the [COLOR START] key or the [BLACK & WHITE START] key.
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
Originals Binding Change is used Binding Change is not used
The reverse side
is upside down. The reverse side
is not upside
down.
Select this when
the pages will be
bound into a
tablet. Select this when
the pages will be
bound into a
booklet.
8½x11
8½x11
5½x8½
Auto
8½x11
Plain
8½x14
8½x11
8½x11
Color Mode Special Modes
Plain
2-Sided Copy
Output
File
Quick File
Copy Ratio
100%
3.
2.
1.
Original Paper Select
Full Color
Exposure
Auto
4.
Plain
7
8½ 11
Special Modes
2-Sided Copy
A
1 2
A A
A
3
A