Sharp MX-C311 Operation Manual Download Page 37

Page: 37 / 849

REPLACING SUPPLIES AND MAINTENANCE

Clean the main charger.

(1) Gently push the charger cleaner all the way in.

(2) Gently pull the charger cleaner out.

(3) Repeat the above (1) to (2) three times.

• Take care not to let the tip of the charger cleaner become soiled by

toner.

• Clean with the mark (

) on the charger cleaner facing down.

• Holes to be cleaned by the charger cleaner are indicated by labels

similar to (A).

• Do not use the charger cleaner for any purpose other than cleaning

the main charger.

(A)

Position of mark

mxc401_us_saf.book 34 ページ２００８年１０月１５日　水曜日　午前１１時５２分

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-C311, Operation Manual, Page: 37 / 849

Search results

Summary of Contents for MX-C311

Reviews: