Sharp MX-C311 Operation Manual Download Page 33

Page: 33 / 849

REPLACING SUPPLIES AND MAINTENANCE

Replace the staple case.

Push the staple case in until it clicks into place.

Slide the finisher back to the right.

Gently slide the finisher back to the right until it locks into its original position.

Close the cover.

Take care that your fingers are not pinched when closing the cover.

Make a test print or copy in staple sort mode to verify that stapling takes place
correctly.

mxc401_us_saf.book 30 ページ２００８年１０月１５日　水曜日　午前１１時５２分

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-C311, Operation Manual, Page: 33 / 849

Search results

Summary of Contents for MX-C311

Reviews: