Sharp MX-C311 Operation Manual Download Page 119

Page: 119 / 849

INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER

Click the [Auto Configuration] button.

The settings are automatically configured based on the detected machine status.

*The screen shows the PCL6 printer driver.

Configure the image of the machine.

An image of the machine is formed in the printer driver configuration window based
on the options that are installed.

(1) Select the options that are installed on the machine.

(2) Click the [OK] button.

To cancel the image settings, click the [Cancel] button.

(1)

(2)

!mxc381_us_ins.book 36 ページ２００８年８月１９日　火曜日　午前１０時４２分

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-C311, Operation Manual, Page: 119 / 849

Search results

Summary of Contents for MX-C311

Reviews: