Home
/
Sharp
/
MX-C311
/
Operation Manual

Sharp MX-C311, Operation Manual, Page: 444 / 849

Share

Page: 444 / 849

Sharp MX-C311 Operation Manual Download Page 444

4-26

To fax thick originals or pages of a book, use the document glass.

☞

USING THE DOCUMENT GLASS FOR TRANSMISSION

(page 4-32)

If you wish to send a fax ahead of other previously reserved fax
transmissions, use direct transmission mode.

The original is transmitted directly to the receiving fax machine without being scanned into memory.
When direct transmission mode is used, transmission will begin as soon as the transmission in progress is completed
(ahead of any previously reserved transmissions).
To send a fax by direct transmission, touch the [Direct TX] key in the base screen.

☞

USING THE AUTOMATIC DOCUMENT FEEDER TO SEND A FAX IN DIRECT TRANSMISSION MODE

☞

USING THE DOCUMENT GLASS TO SEND A FAX IN DIRECT TRANSMISSION MODE

When the document glass is being used for a transmission, Quick Online transmission will not operate.

• When transmission in direct transmission mode ends, the mode automatically changes back to memory transmission

mode.

• When the document glass is used, multiple original pages cannot be scanned.

1

1

1

Transmission

Address Book

Address Review

Sub Address

Direct TX

Scan

Transmission

«
...
442
443
444
445
446
...
»

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments