manualshive.com logo in svg

Sharp MX-C311, Operation Manual, Page: 152 / 849

Share
Download
Sharp MX-C311 Operation Manual Download Page 152

Warning

• Reproduction, adaptation or translation of the contents of the manual without prior 

written permission is prohibited, except as allowed under copyright laws.

• All information in this manual is subject to change without notice.

Illustrations and the operation panel shown in this manual

The peripheral devices are generally optional, however, some models include certain 
peripheral devices as standard equipment.

The explanations in this manual assume that 500-sheet paper feed units (total of four 
trays) are installed on the MX-C401.

For some functions and procedures, the explanations assume that devices other than 
the above are installed.

The display screens, messages, and key names shown in the manual may 
differ from those on the actual machine due to product improvements and 
modifications.

!mxc381_us_ins.book  69 ページ  ２００８年８月１９日　火曜日　午前１０時４２分

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments