Home
/
Sharp
/
MX-C311
/
Operation Manual

Sharp MX-C311, Operation Manual, Page: 239 / 849

Share

Page: 239 / 849

Sharp MX-C311 Operation Manual Download Page 239

2-3

This section provides information that you should know before using the machine as a copier.

BASE SCREEN OF COPY MODE

Touch the [COPY] key in the touch panel to open the base screen of copy mode.
The base screen shows messages and keys necessary for copying, and settings that have been selected.

(1)

Mode Select keys

Use these keys to switch between copy, image send, and
document filing modes.
If you wish to switch to copy mode, touch the [COPY]
key.

(2)

[Color Mode] key

Touch this to change the color mode.

☞

COLOR COPY MODES

(page 2-21)

(3)

Output display

When one or more output functions such as sort, group,
or staple sort have been selected, this shows the icons of
the selected functions.

☞

(4)

[Exposure] key

This shows the current copy exposure and original type
settings. Touch this key to change the exposure or
original type setting.

☞

CHANGING THE EXPOSURE AND ORIGINAL
IMAGE TYPE

(5)

[Copy Ratio] key

This shows the current copy ratio. Touch this key to
adjust the copy ratio.

☞

REDUCTION/ENLARGEMENT/ZOOM

(6)

[Original] key

Touch to specify the original size.
If the original size displayed in this key is different from
the size of the original you placed, or if the original size is
not displayed, be sure to touch this key and specify the
correct size.

☞

(7)

[Paper Select] key

Touch this key to change the paper (tray) that is used.
The tray, paper size, and paper type will appear. Trays 1
to 4 can also be selected in the paper size display to
open the same screen.

☞

(8)

Original feed display

This appears when an original is inserted in the
automatic document feeder.

BEFORE USING THE MACHINE AS A
COPIER

8½x11

8½x11

5½x8½

Auto

8½x11

Plain

8½x14

8½x11

Color Mode

Special Modes

Plain

2-Sided Copy

Output

File

Quick File

Ready to scan for copy.

Copy Ratio

100%

0

3.

2.

1.

Original

Paper Select

Full Color

Exposure

Auto

4.

IMAGE SEND

DOCUMENT
FILING

COPY

(9)

(8)

(7)

(1)

(2)

(4)

(5)

(6)

(10)

(14)

(11)

(12)

(13)

(3)

«
...
237
238
239
240
241
...
»

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments