manualshive.com logo in svg

Sharp MX-C311, Operation Manual, Page: 146 / 849

Share
Download
Sharp MX-C311 Operation Manual Download Page 146

63

WHEN INSTALLATION WAS NOT SUCCESSFUL

The 
machine is 
not 
detected 
(when 
connected 
to a 
network).

Is the IP address of the 
machine configured?

If the IP address of the machine is not 
configured, the machine will not be 
detected. Make sure that the IP 
address is configured correctly in 
"Network Settings" in the machine's 
system settings (administrator).

➞

System Settings (Administrator) > 
"Network Settings"

Is your computer 
connected to the same 
network as the 
machine?

Windows:

If the machine and your computer 
are not connected to the same local 
area network, the machine will not 
be detected. If the two are 
connected to different sub-networks, 
click the [Specify condition] button 
and enter the machine's name (host 
name) or IP address to search for 
the machine.

Macintosh:

If multiple AppleTalk zones exist, 
select the zone to which the 
machine is connected from the 
menu.

Is the machine power 
on?

If the machine is powered off, it will not 
be detected. Switch on the main power 
switch and the [POWER] key (

) in 

that order. (In Windows, search again 
after powering on the machine.)

Is your computer 
connected correctly to 
the machine?

Make sure that the cable is connected 
securely to the LAN connectors on 
your computer and the machine.
Check the connections at the hub as 
well.

☞

CONNECTING TO A NETWORK  
(page 7)

Problem

Point to check

Solution

!mxc381_us_ins.book  63 ページ  ２００８年８月１９日　火曜日　午前１０時４２分

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments