manualshive.com logo in svg

Sharp MX-C311, Operation Manual, Page: 13 / 849

Share
Download
Sharp MX-C311 Operation Manual Download Page 13

10

REPLACING SUPPLIES AND 
MAINTENANCE

This section explains the procedures for replacing supplies such as toner and 
staple cartridges and routine maintenance.

Replacing the toner cartridges

Be sure to replace the toner cartridge when the message "Change the toner 
cartridge." appears.

In copy mode

OK

Change the toner cartridge.

(       )

Ready to scan for copy.
(        Change the toner cartridge.)

Colors that are running low or have run out of toner are indicated in (

). 

: Yellow toner, 

: Magenta toner, 

: Cyan toner, 

: Black toner

Replace the toner cartridges of the indicated colors.

Y

M

C

Bk

If you continue to use the machine without replacing the 
cartridge, the following message will appear when the toner 
runs out.

When the message appears in the message display, replace 
the toner cartridge for the indicated color.

mxc401_us_saf.book  10 ページ  ２００８年１０月１５日　水曜日　午前１１時５２分

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments