Home
/
Sharp
/
MX-C311
/
Operation Manual

Sharp MX-C311, Operation Manual, Page: 205 / 849

Share

Page: 205 / 849

Sharp MX-C311 Operation Manual Download Page 205

1-14

BEFORE USING THE MACHINE

TURNING THE POWER ON AND OFF

The machine has two power switches. One is the main power switch on the left side of the machine, and the other is the
[POWER] key (

) on the upper right side of the operation panel.

Main power switch

When the main power switch is switched on, the main
power indicator on the operation panel lights up.

[POWER] key

Turning on the power

(1) Switch the main power switch to the "on" position.

(2) Press the [POWER] key (

) to turn on the power.

Turning off the power

(1) Press the [POWER] key (

) to turn off the power.

(2) Switch the main power switch to the "off" position.

Restarting the machine

In order for some settings to take effect, the machine must be restarted.
If a message in the touch panel prompts you to restart the machine, press the [POWER] key (

) to turn off the power

and then press the key again to turn the power back on.

"On" position

"Off" position

T

Main power indicator

[POWER] key

• Before switching off the main power switch, make sure that the DATA indicator for printing and the DATA and LINE

indicators for image send are not lit or blinking on the operation panel.
Switching off the main power switch or removing the power cord from the outlet while any of the indicators are lit or blinking
may damage the hard drive and cause data to be lost.

• Switch off both the [POWER] key (

) and the main power switch and unplug the power cord if you suspect a machine

failure, if there is a bad thunderstorm nearby, or when you are moving the machine.

When using the fax or Internet fax function, always keep the main power switch in the "on" position.

In some states of the machine, pressing the [POWER] key (

) to restart will not make the settings take effect. In this case,

use the main power switch to switch the power off and then on.

«
...
203
204
205
206
207
...
»

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments