manualshive.com logo in svg

Sharp MX-C311, Operation Manual, Page: 93 / 849

Share
Download
Sharp MX-C311 Operation Manual Download Page 93

10

INSTALLING THE PRINTER 
DRIVER / PC-FAX DRIVER

To install the printer driver or the PC-Fax driver, follow the appropriate 
procedure in this section depending on whether the machine is connected to a 
network or connected by USB cable.

☞

WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE (page 22)

WHEN THE MACHINE IS CONNECTED TO A 
NETWORK

This section explains how to install the printer driver and the PC-Fax driver 
when the machine is connected to a Windows network (TCP/IP network).

Supported operating systems: Windows 98/Me/NT 4.0

*

/2000

*

/XP

*

/Server 

2003

*

/Vista

*

/Server 2008

*

* Administrator's rights are required to install the software.

• To install the PPD driver when Windows 98/Me/NT 4.0 is used, see "USING 

THE STANDARD WINDOWS PS PRINTER DRIVER (Windows 98/Me/NT 
4.0)" (page 33) and install the driver using the Add Printer Wizard.

• To use the machine as a network printer in Windows NT 4.0, "TCP/IP 

Protocol" must be installed on your computer. If this is not installed, see 
Windows NT 4.0 Help to install "TCP/IP Protocol".

•

To print to the machine over the Internet using the IPP function when 
the machine is installed in a remote location, or to print using the SSL 
(encrypted communication) function, see "Printing using the IPP 
function and the SSL function" (page 19) and install the printer driver or 
the PC-Fax driver.

•

If the machine is connected to an IPv6-only network, the software 
cannot be installed by detecting or specifying the machine's address 
from the installer.

• The installation procedure in this section is for both the printer driver and the 

PC-Fax driver, although the explanations are centered on the printer driver.

!mxc381_us_ins.book  10 ページ  ２００８年８月１９日　火曜日　午前１０時４２分

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments