Home
/
Sharp
/
MX-C311
/
Operation Manual

Sharp MX-C311, Operation Manual, Page: 313 / 849

Share

Page: 313 / 849

Sharp MX-C311 Operation Manual Download Page 313

2-77

REVERSING THE IMAGE (Mirror Image)

This feature is used to make a copy that is a mirror image of the original.

1

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.
After placing the original, specify the original size.

☞

(page 2-29)

2

Select the special modes.

(1) Touch the [Special Modes] key.

(2) Touch the [Image Edit] key.

☞

[Image Edit] KEY

3

Select Mirror Image.

(1) Touch the [Mirror Image] key so that it is

highlighted.

(2) Touch the [OK] key.

You will return to the special modes screen. Touch the
[OK] key to return to the base screen of copy mode.

4

Press the [COLOR START] key or the [BLACK & WHITE START] key.

Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have
selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the
[Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first original.)

To cancel scanning and copying...

Press the [STOP] key (

).

To cancel a mirror image setting...

Touch the [Mirror Image] key in the screen of step 3 so that it is not highlighted.

Original

Mirror image copy

OK

Mirror

Image

B/W

Reverse

Centering

Photo Repeat

OK

Special Modes

Image Edit

(1)

(2)

«
...
311
312
313
314
315
...
»

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments