manualshive.com logo in svg

Sharp MX-C311, Operation Manual, Page: 777 / 849

Share
Download
Sharp MX-C311 Operation Manual Download Page 777

7-76

SYSTEM SETTINGS

Contents

Scan Settings

Settings related to scanning can be configured.

Default Sender Set

The information stored here is used if you do not specify 
[Reply-To] in the send settings when performing Scan to 
E-mail.

Sender Name

Enter a default sender name (maximum of 20 
characters).

Reply E-mail Address

Enter a default reply address (maximum of 64 
characters).

Default Color Mode Settings

Select a default color mode setting for both color and 
black & white in scan mode.

Black & White

Mono 2, Grayscale

Color Mode

Auto (Mono 2, Grayscale*), Full Color
* When scanning a black and white original with the color 

mode set to [Auto].

Disable Change of B/W Setting in Auto Mode

This prohibits black & white settings from the base 
screen when the color mode is set to Auto.

Initial File Format Setting

This is used to set the default file format for Scan to 
E-mail and USB memory mode when the e-mail address 
is entered manually by touching the [Address Entry] key.

File Format

PDF, TIFF, JPEG (B/W:TIFF), Encrypt PDF, XPS

Black & White

Compression Mode: None, MH(G3), MMR(G4)

Color/Grayscale

Compression Ratio: Low, Medium, High

Specified Pages per File

When multiple pages are scanned, this is used to 
generate a separate file for each scanned page (or 
specified number of pages).
When this setting is enabled, the number of pages per 
file can be specified.

Number of Pages

Any number of pages can be specified as the number of 
pages per file. This setting can be specified when 
[Specified Pages per File] is enabled.

Compression Mode at Broadcasting

This is used to set the compression mode for 
broadcasting using Scan to E-mail or Internet fax. The 
compression mode set here is used for all destinations 
regardless of their individual compression mode settings.

Black & White

MH(G3), MMR(G4)

Color/Grayscale

Low, Medium, High

Other Settings

If only the sender name is stored, it will not be used as 
sender information.

When [JPEG] is selected for the file type, [Specified 
Pages per File] cannot be selected.

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments