SATO TG308, Service Manual

Page: 58 / 252

Section 4: Operation and Configuration
Page 4-18
TG3 Series Service Manual
4.7 INTERFACE MODE (Cont’d)
LAN/Wireless LAN CONFIGURATION
Menu Description
Select the communication protocol.
STATUS3, STATUS4 and STATUS5 are available for selection when LAN/
Wireless LAN interface boards are installed.
The initial value is STATUS4.
When STATUS3 is selected, the printer will proceed directly to IGNORE CR/LF
menu.
When STATUS4 is selected, the printer will proceed to STATUS REPLY TIM-
ING menu.
When STATUS5 is selected, the printer will proceed to ITEM NO CHECK
menu.
Set item number check function.
ENABLE
: Item number check is ON
DISABLE
: Item number check is OFF
The initial value is DISABLE.
This screen is displayed only when PROTOCOL is set to STATUS5.
Set BCC check function.
ENABLE
: BCC check is ON
DISABLE
: BCC check is OFF
The initial value is DISABLE.
This screen is displayed only when PROTOCOL is set to STATUS5.
Set status reply timing to the host.
ENQ
: Returns status after receiving Status Request (ENQ), which was sent
from the host
CYCLE
: Returns status from the printer to the host at 500ms intervals
The initial value is CYCLE.
This screen is displayed only when PROTOCOL is set to STATUS4.