SATO TG308, Service Manual

Page: 94 / 252

Section 4: Operation and Configuration
Page 4-54
TG3 Series Service Manual
4.12 TEST PRINT MODE
(
Cont’d)
3)
Third piece
-- Setting values in both User Mode and Advanced Mode, sensor information, DSW setting
and checksum will be printed.
Item name to be printed Description
Speed (Print Speed) Print speed.
Darkness (Print Darkness) Print darkness and range settings.
H-Offset (Print Offset H)
V-Offset (Print Offset V) Print offset values.
Zero Slash The validity of slashed zero.
When using a slashed zero, “On” will be printed. If not, “Off” will be
printed.
JIS Code JIS code setting.
When JIS code is set, “JIS” will be printed.
When SJIS code is set, “SJIS” will be printed.
Char. Pitch (Character Pitch) Character pitch setting.
For proportional pitch, “Proportional” will be printed.
For fixed pitch, “Fixed” will be printed.
Print Method Print method.
For thermal transfer printing, “Transfer” or “Thermal Transfer” will
be printed.
For direct thermal printing, “Direct” or “Direct Thermal” will be
printed.
Reflective Sensor
Low [Lo<1.0] x.x(V)
High [0.8<Hi-Lo] x.x(V)
Slice Level Auto
This information will be printed when reflective sensor is enabled.
*Setting value will not be indicated in reverse colors.
Transmissive Sensor
Low [0.2<Lo<1.0] x.x(V)
High [0.8<Hi-Lo] x.x(V)
Slice Level Auto
This information will be printed when transmissive sensor is
enabled.
*Setting value will not be indicated in reverse colors.
Head Check The setting of head check function.
“None” will be printed when this function is off. When this function
is enabled and checking the actual printable area, “Normal” will be
printed.
For checking barcode print area, “Barcode” will be printed.
Check P-Size The setting of paper size check function.
“Enabled” will be printed when this function is on. If not, “Disabled”
will be printed.
Calendar Calendar display. If calendar IC is not installed in the printer,
“None” will be printed.
Calendar format is indicated by year, month, day, hour and minute.