SATO TG308, Service Manual

Page: 97 / 252

Section 4: Operation and Configuration
TG3 Series Service Manual
Page 4-57
4.13 DEFAULT SETTING MODE (Cont’d)
4.13.1 Table of Default Settings
DEFAULT SETTING MODE
Menu Description
This screen shows the completion of initialization and three beeps sound is
heard.
After this message is shown, power off the printer.
Items
Default value
TG308 TG312
ADJUSTMENT MODE
PITCH POSITION 0
CUT OFFSET 0
DARKNESS 50
USER MODE
PRINT SPEED 6 INCH
PRINT DARKNESS 2
PRINT OFFSET V:+000 H:+000
ZERO SLASH YES
CHARACTER PITCH PROPORTIONAL
INTERFACE MODE
KEYPAD CONNECT ENABLE
RS-232C CONFIGURATION Priority on interface board settings
BAUDRATE 19200bps
PARITY BIT NONE
STOP BIT 1 BIT
CHARACTER BIT 8 BIT
LAN2/WIRELESS LAN2 CONFIGURATION Priority on interface board settings
IP ADDRESS 0.0.0.0
SUBNET MASK 0.0.0.0
GATEWAY ADDRESS 0.0.0.0
PORT NUMBER 1 1024
PORT NUMBER 2 1025
PORT NUMBER 3 9100
WIRELESS MODE (WIRELESS LAN) 802.11 Ad Hoc
SSID (WIRELESS LAN) (Space)
CHANNEL (WIRELESS LAN) 01
IEEE1284 ACK SIGNAL 0.5
μ
s
PARALLEL SETTING IEEE1284
PROTOCOL STATUS4
STATUS REPLY TIMING CYCLE
RECEIVE BUFFER 1ITEM
ITEM NO CHECK DISABLE
BCC CHECK DISABLE
Keypad CONNECT ENABLE
RFID USER MODE
RFID LIFE COUNT 0
RFID COUNT 0
MAX ERR COUNT 0
RFID ERR SLASH NO
RFID I/O BASE-X ASCII
RFID TAG OFFSET 20mm