SATO TG308, Service Manual

Page: 38 / 252

Section 3: Interface Specifications
Page 3-18
TG3 Series Service Manual
3.7 LAN AND WIRELESS LAN ETHERNET SPECIFICATIONS (Cont’d)
3.7.7 Wireless LAN Setting
For each communication mode and validity
*1. Communication mode is set by DSW.
*2. If there is a group with the same SSID already existing within the communication range, the value used by
the group will be assigned to Channel.
*3. If SSID is set to null (“”), it is possible to connect to the equipment nearby without specifying SSID.
*4. If SSID is set to “ANY”, it tries to connect to SSID “ANY”.
3.8 EXTERNAL SIGNAL INTERFACE (EXT)
The external signal interface is designed to connect the printer to an optional stacker or rewinder.
Variable identifier Setting range Default (Factory setting)
SSID Optional alphanumeric character
(Up to 32 characters) “NULL”
Channel 1 ~ 14 11
Use WEP DISABLE/64 bits/128 bits DISABLE
WEP Key Hexadecimal digit
64 bits?: 10 digits
128 bits : 26 digits "00000000000000000000000000"
Ad hoc 802.11 Ad hoc Infrastructure
SSID x
ο
o
Channel o o x
Use WEP o o o
EXT External Signal Connector Pin Assignments
1 7
8 14